Analysis of top ten influential news events in mol

  • Detail

Analysis of the top ten influential events in the mold industry in 2012

"this year is an extraordinary year for China: the delivery of China's first aircraft carrier; the disclosure of the second fifth generation fighter; and a series of island disputes between China and its neighbors". This year is an extraordinary year for China: the delivery of China's first aircraft carrier; The second fifth generation fighter is open; At the same time, a series of island disputes have occurred between China and its neighbors. The report said that the climax of China's military modernization began in September. First, China's first aircraft carrier Liaoning ship was officially delivered to the Navy; Followed by the first flight of the fifth generation fighter j-31 Uighur eagle on October 31; The China Air Show held in Zhuhai in November focused on the achievements of China's defense industry. The aviation weapons and ground weapon systems exhibited showed that China has become a major competitor of western manufacturers; In November, the J-15 carrier based fighter also successfully conducted the take-off and landing test on the aircraft carrier for the first time. Approaching the end of the year, looking back on the extraordinary 2012, influential events record the changes and development of the mold industry

the report of the 18th CPC National Congress has set the goal of building a moderately prosperous society in all respects by 2020, which is more enriched and improved on the basis of the past. Among them, the basic realization of industrialization is one of the important contents. This goal actually establishes the strategic deployment for China to move forward from an industrial power to an industrial power. On the existing basis, Luo Baihui, Secretary General of the International Mold Association and CEO of Jinmo, believes that there should be standards and study and determine a number of quantitative indicators on how to basically realize the modernization of the mold industry by 2020

the industrialization of the leading countries was largely completed in the middle and late last century. Luo Baihui pointed out that in order to basically realize the modernization of mold industry in the 1920s, China should not only learn from the experience and lessons of leading countries, but also reflect the general pattern of today's economic globalization and the background of the rapid development of modern science and technology. According to the national conditions of China's primary stage of socialism and the requirements of the new industrialization road with Chinese characteristics, we should scientifically and reasonably determine some standards for basically realizing the modernization of mold industry

first of all, we should reflect the indicators of the development level of productivity. Mold industry should have green development, low-carbon development and circular development, as well as safe development. It should have advanced industrial economic and technical indicators, among which energy conservation and emission reduction, variety and quality are particularly important. The key is to greatly improve the scientific and technological level and informatization level of the mold industry, and master a number of core technologies and key technologies in key fields, so as to be in the forefront of the world

secondly, the industrial structure should have an appropriate proportion. At present, the industrial added value accounts for 40% of GDP. In addition, the second industry accounts for 45%, the first industry accounts for 12% of the initial electronic tensile machines, and the third industry accounts for 43%. After eight years, the total industrial output will increase, but the proportion may decrease, and the proportion of three industries will increase, which should be calculated scientifically. When industrialization is basically realized, there should also be quantitative indicators for the proportion of high-tech industries and strategic emerging industries in the industrial field. To reflect the 18th National Congress pointed out that industrialization, informatization, urbanization and agricultural modernization are developing synchronously, and the mold industry standards must go first. Luo Baihui believes that the basic realization of mold industry modernization should be related to the indicators of people's livelihood. The modernization of mold industry is the historical process of economic and social development. Its connotation is that mold equipment manufacturing is the focus, but it is not all industry, but the progress of the whole society. People oriented is the core position of the scientific outlook on development. To realize industrialization in an all-round way, we should reflect the strength of the country and the prosperity of the people, and there should be significant changes in employment, social security, education, medical treatment and housing. The modernization of mold industry is the support and foundation of a well-off society in an all-round way

on the basis of the above standards, we should basically realize the modernization of mold industry and strive to change the deep-seated factors restricting economic development. Industrialization will be basically realized in 2020, and we should have a clear understanding of the deep-seated problems and structural contradictions in the industrial field. At present, China's industrial added value is 18.8 trillion yuan, ranking first in the world, but the problem is large but not strong. First, the ability of independent innovation is not strong. According to Luo Baihui, many key technologies and core technologies are controlled by others, and some complete sets of mold and machine tools, key parts and components and key materials still rely on imports. For example, large-scale integrated circuits, high-end chips, aviation and marine engines, high-speed railway locomotive turn bearings, high-end CNC machine tools, special model die steel, etc., have to rely on imports. Second, the resources and environment have been difficult to support. The energy consumption per unit of GDP is too high, 2.2 times the world average and 4 times that of developed countries. Last year, China's total energy consumption was converted into 3.48 billion tons of standard coal, accounting for 20.3% of the world, while only creating 10.4% of the world's GDP. China uses 45% of the world's steel, 46% of coal, 50% of cement and 14% of oil and gas. The dependence on crude oil import reached 56%, iron ore import exceeded 50% based on iron content, and the import of aluminum ore and copper products reached 50% and 70% respectively. Although the emissions of pollutants such as chemical oxygen demand (COD) and sulfur dioxide are decreasing, the total amount ranks first. The intensity of CO2 emission is decreasing, but the total amount ranks first. If we do not accelerate the transformation of development mode, the energy environment can not be supported. Third, the industrial structure is unreasonable. Backward production capacity accounts for about 15% ~ 20%, and there is obvious overcapacity in some industries, such as die steel, non-ferrous metals, chemical plastics, flat glass, shipbuilding, wind power equipment, polysilicon and other industries. The low quality of some products has caused adverse effects. On the whole, China's manufacturing industry is still in the middle of the world. Fourth, the imbalance between regions and industries, and b) the uncoordinated horsepower of electromechanical oil pumps. Due to various reasons, the imbalance of regional economy, spatial layout, industrial chain and enterprise structure, and the phenomenon of blind investment, repeated construction and similar industries have increased, affecting the quality and efficiency of industrial development. If there is no obvious improvement in these four problems, it is impossible to basically realize industrialization. Although it is impossible to solve them all, there should be obvious changes. Solving these four problems is the entry point for the mold industry to change the development mode and adjust the industrial structure

we must be soberly aware that China is still in the primary stage of socialism and will be in the primary stage of socialism for a long time. For a large country with a population of 1.3 billion, in order to achieve a well-off society in an all-round way in 2020, it is applicable to the tensile test of metal bars, plates, ribbed steel and fasteners in 2050 to automatically obtain the result parameters specified in relevant standards (corresponding fixtures or deformation measuring devices need to be configured); The software meets the requirements of GB/t17671 (1) 999 and GB/t50081 (2) 002. To realize modernization, the real economy still needs considerable development, and the industrialization and modernization of molds have a long way to go. Luo Baihui stressed that we should unswervingly implement the scientific outlook on development, unswervingly rely on innovation driven, unswervingly deepen reform and opening up, and strive to achieve the goal of mold industry modernization in 2020


Copyright © 2011 JIN SHI